ATI Technologies RADEON 9000 User Manual
Radeon, User’s guide
Advertising
RADEON
™
9000
User’s Guide
P/N 137-40442-10
Copyright © 2002, ATI Technologies Inc. All rights reserved.
ATI and all ATI product and product feature names are trademarks and/or registered
trademarks of ATI Technologies Inc. All other company and/or product names are
trademarks and/or registered trademarks of their respective owners. Features,
performance and specifications are subject to change without notice. Product may not
be exactly as shown in the diagrams.
Reproduction of this manual, or parts thereof, in any form, without the express written
permission of ATI Technologies Inc. is strictly prohibited.
Advertising
Table of contents
Document Outline
- Introduction
- Connecting Your Monitor
- Catalyst™ Software Suite
- Direct3D® Control Panel
- OpenGL® Control Panel
- SMARTGART™
- Using TV Out
- Connecting to a TV or a VCR
- Connecting S-Video Out to a TV or VCR
- 1 Turn off your PC and your TV (or VCR).
- 2 Ensure your card was installed correctly as per the Getting Started Guide.
- 3 Determine if your TV (or VCR) has a S-Video or Composite video connection.
- 4 Looking at the back of your PC, locate your S- Video Out. Using a S-Video cable or the supplied...
- 5 Turn on your PC and your TV (or VCR).
- 1 Access the Windows® Control Panel. Double- click Display.
- 2 Click on the Settings tab and then the Advanced... button.
- 3 Click on the ATI Displays tab. Click on the TV button.
- 4 Click the enable/disable button.
- 5 Click OK or Apply to save the changes.
- To Use Larger Display Fonts
- To Increase the Horizontal Size
- 1 Access the Windows® Control Panel. Double- click Display.
- 2 Click on the Settings tab and then the Advanced... button.
- 3 Click on the ATI Displays tab.
- 4 Click on the TV button.
- 5 Click the Adjustments tab.
- 6 In the Screen Size section, click on the plus (+) button beside the horizontal arrowheads to in...
- 7 Click OK or Apply to save the changes you have made.
- To Increase the TV Contrast
- 1 Access the Windows® Control Panel. Double- click Display.
- 2 Click on the Settings tab and then the Advanced... button.
- 3 Click on the ATI Displays tab.
- 4 Click on the TV button.
- 5 Drag the Contrast slider to the right to increase the contrast.
- 6 Click OK or Apply to save the changes you have made.
- Connecting S-Video Out to a TV or VCR
- Connecting to a TV or a VCR