Smithco Envizio Pro Installation & Operation Manual - Manual (Page 214)

Appendix F
204 Envizio Pro and Envizio Pro II Installation and Operation Manual
The Cycle Product icons are used when more than one product is connected to
the CANbus system. The Cycle Product icons indicate for which product
information is currently being displayed. Touch the icon to cycle the selected
product to access settings or display information for additional product nodes or
control channels connected to the CANbus system.
Home Screen
The Home screen offers access to the following features of the field computer:
Touch the Start Job icon to begin a new job, select a previous job or to return to the Guidance
screen if a job is already in progress.
Touch this icon to access the Tools Menu. The Tools Menu is only available from the Home
screen. Refer to Chapter 7, Tools Menu, for information about settings and using the Tools Menu.
If a job is in progress, the End Guidance icon will appear on the Home screen. Touch this icon to
the end the active Guidance session.
When the console is powered on or when Guidance is not active, the Shutdown icon will be
displayed. Raven recommends using the Shutdown feature before pressing the power button.
Information
Touch the information icon in the upper, right corner of the home screen to display the software and image
versions currently installed on the field computer.
Product 1
Selected Product 2
Selected