SOMFY TELIS 16 RTS - Manual

QUICK PROGRAMMING FOR TELIS 16 RTS
DESCRIPTION
The Telis 16 RTS remote control allows you to control up to 16 end-products
or groups of end-porducts using Radio Technology Somfy (RTS)
BEFORE YOU BEGIN
We recommend that each motor is programmed in advance using an
individual Telis 1 RTS transmitter and that the limits of each
motor are set. However, like any RTS remote control transmitter, the
Telis 16 RTS can be used for motor programming operations
(limit switch adjustment, etc.)
After 2 minutes of inactivity, the Telis 16 RTS screen automatically goes
to SLEEP MODE. When the screen is off, first press any button to turn it on.
STEP 1: Select the channel you want to customize using the arrow
buttons or .
STEP 2: Press and hold the SELECTION button ( ) until SET
appears on the screen SET MODE is activated. The flashing icon
(shades/shutter, rolling shutters/skylight shades and awning)
are displayed. Use ARROW buttons and to scroll through
the choices.
Naming a Channel
71
STEP 6: The character flashes to select another character, press the ARROW
buttons or .
STEP 3: Briefly press the SELECTION button ( ) to save the icon displayed and
move to the first character.
STEP 4: Select the location of the character to be edited using the navigation
buttons or . The flashing hyphen corresponds to the character to be edited.
STEP 5: Briefly press the SELECTION button ( ) to edit the character in this location.
Selection button