SOMFY TELIS SOLIRIS RTS - Manual

Telis Soliris RTS Patio Remote Control
Installation and Operation Instructions
Programming
Button
BACK
my
Sun/Wind
Selector
Telis 1
Wind
Only
Sun
& Wind
1. Using a paper clip, pen or similar device,
press and hold the Programming Button on
the back of your current remote until your
window shade jogs up and down.
PROGRAMMING - ADDING A NEW REMOTE
3. Using a paper clip, pen or similar device,
press and hold the Programming Button
on the back of your new remote. The
window shade will jog. This remote will
now operate your shade or awning.
2. Pick up your new remote.
Programming
Button
Programming
Button
BACK
PROGRAMMING - SETTING FAVORITE ‘MY’ POSITION
1. Using the up ( ) or down ( )
buttons, bring the shade or awning
to your favorite position, for example
halfway down or out. Press the
center ( ) button to stop movement
at the desired location.
BACK
my
Pen
Pen
my
Pen
my
3. To reach your favorite position,
press the center ( ) button
whenever the shade is already
stopped. The shade or awning
will automatically go to that
position.
2. Press and hold the center ( )
button until the window shade
jogs up and then down to record
the position.
my
Telis 1 Soliris RTS Pure
Part # 1810635
Telis 1 Soliris RTS Patio
Part # 1810647
Single Channel