SOMFY SONESSE 50 RTS - Manual (Page 3)

3
© 2013 Somfy SAS. All rights reserved. 04/2013
EN
2.2. Specific safety advice
In addition to the safety instructions described in this guide, be sure to also observe the
instructions set out in the attached document "Safety instructions to follow and keep".
1) Switch off the mains supply of the shade before
performing any service operation in the vicinity.
To avoid damaging the product:
2) Never immerse it in liquid!
3) Avoid impacts!
4) Do not drop it!
5) Never drill holes in it!
6) Avoid moving the shade if ice has formed on it.
1
3
5 6
2
4
Off
1) Fit the crown (a) and drive wheel (b) to the motor.
2) Measure the length (L) between the end of the drive
wheel and the head end.
1) Cut the tube to the required length.
2) Deburr the tube and remove the debris.
3) For smooth roller tubes, cut a notch with the
following measurements:
e = 4 mm / 0.16 In h = 28 mm / 1.1 In
3. INSTALLATION
a
b
Ø>47mm
c
d
e
e h
e
h
a
b
Ø>47mm
c
d
e
e h
e
h
Ø > 47
e h
Ø > 47
e h
Ø > 47
e h
3.1. Motor preparation
3.2. Tube preparation