SOMFY THERMO SUNIS INDOOR WIREFREE RTS SUN SENSOR Installation - Manual (Page 15)

15 Page
EN
Copyright © 2008 Somfy SAS. All rights reserved.
EU/US selection mode
(Thermosunis)
• Place the mode selector to Mode 2
(1) or Mode 3 (2).
• Turn the sensor off ( ).
• Press and hold the Mode button (3)
for approximately 2 seconds when
the sensor is turned on.
US EU sun LED changes from red to green
EU US sun LED changes from green to red
3
1 2
Caution: If a malfunction occurs during movement:
The receiver and sensor must be set to the same
mode: EU mode or US mode.
see installation guide for the receiver.
Factory setting: US Mode
Caution: Sunis Indoor Wirefree RTS operation only in
mode 1 .
Changing the mode