SoundFreaq SFQ-06 - Manual

1. Press the POWER ( ) button to turn on Sound Platform
2. Press the SOURCE button on the unit or remote control to
toggle sources to select FM Radio mode.
3. Press the button and button on Sound Platform 2 to
tune to the desired FM radio station.
Note: Use the included FM ANT for better reception.
Optimizing Sound Quality Playback via AUX Charging an External Device
Soundfreaq App
Finger Notch
Door Cable Clip
Universal Device Stand
USB Power Ports
Listening to the Radio
AUX IN Jack
FM ANT Jack
PAIR Button
POWER Button
Pair Indicator
Playback via Bluetooth
is a proprietary technology that enhances stereo
separation. To turn UQ3 on/off press the button.
Press TONE button to select a bright, warm or neutral tone
for your listening preference.
TIP: Sound Platform has been tuned to a balanced acoustic
profile. You can use the EQ settings on your playback device
to further customize the EQ balance to suit your personal
preference.
Note: Some custom EQ settings when combined
with UQ3 enhancement may cause distortion.
Tip: For playback in Bluetooth or Aux mode, the output
volume is set by both the volume control on Sound Platform
2 and the source device. Both may be adjusted to set your
preferred listening volume. Typically, sound quality is best
when the volume of the source device is between 70-90%.
Note: As with any speaker system, if the volume on both
your source device and the speaker are at maximum output,
it is possible to overdrive the speakers and cause distortion.
When using an iOS device or other device that offers a
"volume limit" feature, turn this setting off for higher
volume listening in Bluetooth or Aux mode.
For safety, care and additional operating instructions please
download the User Manual at
www.soundfreaq.com .
For further assistance with setting up Sound Platform 2,
we are available at:
1. Press the POWER ( ) button to turn on Sound Platform
2. Press the SOURCE button on the unit or remote control to
toggle sources and to select Bluetooth mode.
3. Press the PAIR button on the unit to place it in pair mode.
Once in pair mode the pair indicator will flash rapidly.
Note: The pair indicator turns solid after the device is
successfully connected.
4. Open the Bluetooth settings menu on your Bluetooth
enabled mobile device or computer. Once the unit is
recognized, “Sound Platform 2” will appear on the list of
detected devices. Select “Sound Platform 2” to pair with
your device. On Apple iOS devices, select Settings >
General > Bluetooth and tap “Sound Platform 2” from the
device list.
Note: For detailed instructions to pair Mac or
Windows PC, please refer to online support.
[email protected]
soundfreaq.com/support
™
Sound Platform 2
We offer a Soundfreaq App to use as a remote control for
Sound Platform 2. Visit the iTunes App Store or Google Play.
Connect any device with headphone or line out jack with
a 3.5mm line in cable into the
AUX IN Jack. Press the
SOURCE button to cycle through input options to select
Aux input.
The USB power jack can be used to charge most devices
that allow for USB charging (including many mobile
phones, smart phones and wireless headsets).
Note:
Please use the USB power cord that came with your
device to connect to Sound Platform 2 to charge.
The Universal Device Tray slides out to hold a phone or
tablet while streaming or charging. Press the front of the
Universal Device Stand to open. To neatly stow cables,
use the Finger Notch to open the Door on the back of
Sound Platform 2. Cables can be routed from the back to
the front of the Universal Device Tray and held in place
with the Cable Clip.