SoundTraxx DSD-150/DSX Technical Reference - Manual (Page 25)

Address Mode Direct Mode
Register Mode Ops Mode Short Form
Paged Mode Ops Mode Long Form
Digital Sound Decoder Technical Reference 25
CV 33
FL(f) OUTPUT
LOCATION
Description
Maps the FL(fwd) function to any of eight DSD auxiliary function outputs as defined by a 1 in the
corresponding bit position:
bit 7 bit 0
DYNO F5 HISS BELL WHSTL F1 BL HL
Bit 0: HL, Head light output
0 = Output is unaffected by FL(fwd).
1 = Output is activated when FL(fwd) is on.
Bit 1: BL, Backup light output
0 = Output is unaffected by FL(fwd).
1 = Output is activated when FL(fwd) is on.
Bit 2: F1, Function 1 Output
0 = Output is unaffected by FL(fwd).
1 = Output is activated when FL(fwd) is on.
Bit 3: WHSTL, Whistle Sound Effect
0 = Sound is unaffected by FL(fwd).
1 = Sound is activated when FL(fwd) is on.
Bit 4: BELL, Bell Sound Effect
0 = Sound is unaffected by FL(fwd).
1 = Sound is activated when FL(fwd) is on.
Bit 5: HISS, Cylinder Blowdown/Hiss Sound Effect
0 = Sound is unaffected by FL(fwd).
1 = Sound is activated when FL(fwd) is on.
Bit 6: F5, Function 5 Output
0 = Output is unaffected by FL(fwd).
1 = Output is activated when FL(fwd) is on.
Bit 7: DYNO, Dynamo Sound Effect
0 = Sound is unaffected by FL(fwd).
1 = Sound is activated when FL(fwd) is on.
A value of 00, sets FL(fwd) to control HL output.
Default Value: 1
Related CVs: See also CVs 33-42.
❐ ■
❐ ❐
■ ■