Soundtube SM1001p - Manual (Page 3)

Do not spec or install speaker near support beam, ventilation duct or
other structure that may interfere with speaker function or dispersion.
Warning Warning
SoundTube speakers must be installed by a professional audio installer/contractor. For safety and for
optimum audio performance, installer must follow all directions issued by SoundTube Entertainment.
Security screw
Surface-mount bracket
Note: Speaker ships separately
Forged eyebolt
Speaker brackets
Mounting screws
Box contents: Surface-mount kit
1 Surface-mount bracket
2 Speaker brackets
8 Fasteners (1/2" wood screws)
1 Security screw
For wiring instructions, consult SM1001p installation instructions.
Alternate optional accessory is a corner mount bracket (AC-SM1001p-C).
© 2010 SoundTube Entertainment, Inc. All rights reserved. PN SM1001p-S Rev 07.13.10
3b. Downward aiming:
Mount speaker brackets to
top of speaker with tabs
facing front of speaker. Use
included 1/2 inch wood
screws.
5. Connect wires and set
gain and filters as described
in the SM1001p installation
instructions.
1. Unpack subwoofer and
unscrew 4 feet. Remove
screws from rubber plugs
and replace screws to fill
holes.
4. For a safety cable
attachment, screw the
forged eye bolt into the
1/4-20 inserts on the back
of the speaker. Attach
included safety cable from
forged eyebolt to secure
mounting point on
structure. Installer to supply
fastener to structure.
2. Choose a secure
mounting surface with
sufficient strength to reliably
hold the speaker.
Surface-mount bracket must
be mounted at least 3
inches below ceiling, beam
or other top structure.
Bracket accepts 1/4 inch lag
bolts (installer to supply
fasteners).
Be sure
mounting tabs point up.
3a. Outward aiming: Mount
speaker brackets to back of
speaker with tabs down.
Use included 1/2 inch wood
screws.
7. Install security screw.
8. Done!
6. Slide speaker onto
pre-mounted bracket.
AC-SM1001p-S Install Instructions For:
SM1001p Surface Mount Bracket
1.435.647.9555 | 800.647.TUBE | www.soundtube.com
Install Instructions For:
SM1001p Surface Mount Bracket
AC-SM1001p-S