17) optional protective reverb screen, 18) replacing parts, 19) installation data – Space Ray DK Series User Manual

Page 19

Advertising
background image

Form #43219010

Sept 2012

16) OPTIONAL PARABOLIC REFLECTOR EXTENSION ASSEMBLY

The heater is completely factory assembled and requires no field assembly. If the optional parabolic reflector
extension is utilized, locate and identify the end panels
and side panels as shown in the following diagram.
Attach the side panels as shown. Attach the end panels
so that the end flanges of the end panels overlap the
side panels. Attach the side panels and end panels
together with the screws provided in the kit. Attach the
remaining screws as shown in Detail A. This is to
ensure that the Parabolic Reflector Extension is
securely attached to the reflector. The clearances to
combustibles (shown on the clearance label that is
secured to the reflector on the control end of the heater
and in Section 4 of these instructions) must be closely
observed. Please order the Parabolic Reflector
Extension Kit using the Part Numbers below:

Model No.

Parabolic Reflector

Extension Kit Number

DK30, DK33, DK35, DK40

#43822010

DK60, DK66, DK70, DK80

#43822020

DK100, DK120

#43822030

DK132, DK140, DK160

#43822040



17) OPTIONAL PROTECTIVE REVERB SCREEN


The optional protective Reverb Screen acts as a safety net in
the unlikely event that the ceramic tile assembly is broken by
an outside force. In addition, it increases the overall emissivity
of the radiating surface with a blackbody radiation effect. It is
recommended in high-traffic areas as well as where improved
radiant output is desired. Please order the Protective Reverb
Screen using the Part Numbers listed to the right:

18) REPLACING PARTS

At all times when parts are being replaced, ensure that both the gas and electrical supplies are disconnected.
Various parts are available from the factory for replacement by a licensed service person. Refer to the exploded
parts guide in Section 20 for all replacement parts.

19) INSTALLATION DATA

Date of
Installation:

Number of
Heaters in System:

Heater Serial Number:

Heater Model:

DK

N =Natural Gas
L =Propane Gas







18

Model No.

Reverb Screen

Kit Number

DK30, DK33, DK35, DK40

#43876010

DK60, DK66, DK70, DK80

#43876020

DK100, DK120

#43876030

DK132, DK140, DK160

#43876040

Advertising