Stix & Drums DRM 212 - Manual (Page 2)

Introduction
Thank you for choosing Stix & Drums. When your speakers are installed and used properly, you can expect
exceptional aural performance and years of trouble free service. Please read this manual thoroughly prior to
installation.
Information in this guide is meant only for the purpose of using the AmbiSonic Systems supplied mounting
equipment. All other rigging and/or structure support including wall securing hardware is considered part of
the venue and/or end-user supplied equipment and is not addressed in this guide.
AmbiSonic Systems assumes that a working knowledge of accepted rigging practices and safety will be applied
to all rigging materials and practices employed. All rigging or wall mounting should be performed by a professional
installer or installation company and should follow all state and local building codes. All fasteners should be rated at
a minimum of 3-5 times the actual determined load. All walls are not created equal (drywall, masonry, wood, etc.)
In some instances it will be necessary to install “Backing” plates or other reinforcement to assure proper mounting.
Remember that the weakest component determines the safety of the entire rigging assembly. Prior to securing the
array, always inspect all hardware components for wear, deformations, corrosion and missing or damaged parts.
Also confirm that the venue attachment points are suitably load rated for the array. No information contained in
this guide is intended as a warranty on the part of AmbiSonic Systems.
Users assume all responsibility for the appropriate use of AmbiSonic Systems supplied rigging hardware and follow
at a minimum all applicable laws and regulations in force for each venue.
Anyone using this information assumes all liability arising from it’s use. Product abuse, use of the product not in
accordance with AmbiSonic Systems instructions or use in an application which the product has not been designed
for is not covered under any AmbiSonic Systems warranty nor is AmbiSonic Systems liable for any loss or damage.
Safety Responsibilities and Liability
Stix and Drums LLC 1990 N. McCulloch Blvd. Ste. D222 Lake Havasu City, AZ Voice: 928.733.6002 Fax: 928.453.5550
[email protected] www.stixanddrums.com