Studio Technologies 68A 2001 - Manual (Page 29)

Model 68A/69A User Guide Issue 1, March 2001
Studio Technologies, Inc. Page 29
for Surround
Press and hold both Surround A and Stereo B
buttons for 5 seconds to restore Model 69A
factory defaults. Once defaults have been
restored, the LEDs will light. After buttons are
released, configuration mode will be exited
and normal operation will resume.
Model 69A Configuration—Restore Factory Defaults
Factory Defaults: All channels associated with each input are active.
Stereo output can be enabled.
Surround output channels C, LS, RS, and LFE not active when stereo output enabled.
Additive solo mode enabled.
Upon power up, mute all function enabled.
Level control operates modified logarithmic.
Level control auto mute all function enabled.
Reference level is set for fully attenuated (minimum) monitor output level.
Remote input select function disabled.
Surround A associated with remote input select function.
20dB dim level.
Remote mute all disabled.
Remote dim disabled.
Spare remote input disabled.
Mono mode: mono-to-center.
3dB attenuation when mono active.
Downmix activated when mono activated.
Note: The 5-second delay is a safety feature, ensuring that the factory defaults will not be accidently
restored.
&