Hardware installation – Sundance SMT8081 User Manual
Page 7
Advertising
Version 1.0
Page 7 of 13
SMT8081 User Manual
Hardware installation.
Here are the basic steps to follow to install an SLB module with its mezzanine. As an
example, the SMT381-VP, which is the combination of the SMT338-VP (SLB Base
Module) and the SMT381 (Mezzanine Module). Please note that photographs don’t
necessarily match exactly with the SMT8081 system but refer to similar products.
1 – Place the SMT395 on TIM site 1 of the carrier board (SMT310Q).
2 – The following are then required to mount SMT338-VP+381 on the SMT310Q:
Top Primary TIM Connector
Bottom Primary TIM Connector
SHB
B
SHB
A
RSL
B
RSL
A
Po
w
e
r
SMT381
TIM 3.3V
SMT338-VP
a – First, fit two Nylon screws (M2x10), pointing out (the head of the screws on
bottom side).
Advertising