Super Systems 5000 - Manual (Page 3)

2
Model 5000 User’s Manual Rev -
Overview
The Model 5000 controls temperature, carbon, and quench with a touch screen operator
interface.
There is an indicator light on the top of the enclosure. When a cycle is running, the
green light will be lit. Once the cycle finishes, the yellow light will be lit. If there is an
alarm, the red light will be lit. More than one light can be lit at a time. On the front of
the enclosure there is a horn and a bell. The horn will sound for alarms while the bell
will sound for the end of a cycle. There are two green indicator lights on the front of the
enclosure. The green light on the left is lit when atmosphere gas is enabled. The green
light on the right is lit when Event 1 is running. The three red switches allow the
operator to silence alarms if the unit is alarming. On the left is a switch for a Furnace
Overtemp alarm. In the middle is a switch for Alarms 1 and 2. On the right is a switch
for the Quench Overtemp.
For information on the touch screen operator interface, please reference the
Series
9205 Operational Manual. For information on the overtemp controllers, please
reference the 7SL High Limit manual. For information on the temperature controller,
please see the 7EK Temperature Controller manual.