SVSi N3510 - Manual

Please contact SVSi technical support at [email protected] or 256.461.7143 x9900 for any installation issues.
Visit our support webpage at support.svsiav.com.
Distribution Switching Recording Windowing Wall Processing Control
Southern Vision Systems, Inc.

256. 461.7143

www.svsiav.com
SVSi is a trademark of Southern Vision Systems, Inc. in the United States and other countries.
800DOCN3510QSREV1.0
Made in the USA.
N3510 QUICK START
Troubleshooting
Use the following guidelines when troubleshooting your setup.
The N3510 is routed to a Decoder, but the Decoder is showing local play content.
• Is Stream Output set to enabled (black text in N-Able matrix)?
• Does the N3510 have a control IP address?
• Did you verify that no other devices have the same Stream number as the N3510?
• Is the Decoder properly assigned to the output of the N3510?
• Is the network configured appropriately for N3000 video traffic?
The N3510 is routed to a Decoder, but the Decoder only shows nine SVSi logos.
• Are the source Encoders enabled (black or blue text in the N-Able matrix)?
• Are the video sources properly routed to windows of the N3510?
• Is the network configured appropriately for N3000 video traffic?
You cannot access the unit properties after discovery.
Verify that the host PC has an IP address in the same range as the N3510.Double-click the name of the unit to
access its properties or use a web browser to access the unit via its IP address. Default login is admin and
password.
The web page is not loading or displaying correctly.
Please retry using Firefox or Chrome (some versions of Internet Explorer are not supported).
Additional Required Hardware
One or more N3000 Encoders and one or more N3000 Decoders are required when using this product.
Congratulations on the purchase of your N3510 Windowing Processor — part of SVSi’s family of Networked AV
products. An SVSi Networked AV system comprises video and/or audio Encoders, Decoders, and other network
accessories including recording solutions, multi-window processing, audio-only end points, and system controllers.
The system allows you to distribute HD Video, Audio and Control across a gigabit Ethernet network. Options are
available for recording, playback, and wall processing.
The N3510 is a network-attached 2RU unit designed to accept nine N3000 Networked AV video streams, each of
which can be cropped, sized, and scaled to any value and streams can be combined into a single output. There are
no raw video inputs or outputs to the N3510. Networked AV streams are transmitted and received through the same
network connection. The network connection is an auto-sensing gigabit Ethernet switch port and can be used to
distribute the N3510 output to multiple screens or to integrate third-party network appliances.
Wiring for the N3510
1. The N3510 requires network connection. Connect the network cable from the switch to the unit’s network con-
nection.
2. Connect the power cable and turn the unit on.
3. Connect a monitor to the DVI output connector (optional).
N3510 Windowing Processor Rear View
N3510 Windowing Processor Front View
17.0”
1) Power and Reset Buttons
2) Status Indicators
3) DVI-D Digital Output 4) Network Connection
5) 120V Power Connection and On/Off Switch
3.5”
1
2
4
17.0”
3.5”
5 3