Swami WATCH GOLF GPS - Manual (Page 19)

Charging Swami Watch
1. Place Swami Watch on charging station, make sure when docking the unit the black
arrow highlight in red on the charging station below
(Image A)
is pointing up toward the
buckle of the watch. Unit should rest in slot of charging station.
(Reference Image B)
2. Plug charging station AC adapter into outlet. Next, press the left side button in toward
the watch until it locks into place.
(Reference Image B).
To release watch from charging
station press button in top right corner of charging station highlight in red
(Image B).
3. Swami Watch has begun charging when the screen below
(Image C)
is shown. The
3 bars located in the battery icon will blink when charging. When fully charged, the
battery bars will stop blinking. Full charge takes about 4-5 hours.
16 Charging Swami Watch
usb connect
Image A Image B
Image C
Charging Station
Note: If screen shown to the right (Image C)
is not shown on swami watch while locked in
charging station, the watch may not be properly
placed in charging station. Make sure watch is
placed as shown in the instructions above.
Note: Charging station can charge the watch
through your computer by using the USB
end of the USB cable. Plug into USB port of
your computer to charge unit this way.