System Fidelity ST-250 - Manual (Page 9)

FRONT PANEL DESCRIPTION
(1) Mains switch: Used to switch on and off the unit by switching the mains voltage.
(2) LED indicator: Lights blue indicating that the CD-player is on stand-by mode. Switched off
when the CD-player is in operation and LCD display is lit.
(3) LCD display: main display displaying most of the function performed.
(4-8) Direct access buttons to stored stations
(9) FM/AM: Switches between FM and AM.
(10) Autotune: Press this button once and the tuner will start to automatically tuning and
store all available stations.
(12) Memory: After manually tuning in station, press this button once and the tuned in
channel will be stored on the current preset.
(11) Preset -: Changes down in presets.
(13) Preset +: Changes up in presets.
(14) ST/Mono: Changes between stereo and mono on the FM band.
(15) Reset: Resets the tuner.
(16) Tuning: Turn this button clockwise to tune up in frequency, and counter clockwice to
tune down in frequency.
REAR PANEL DESCRIPTION
Stereo Output: Analogue stereo output. For connection to stereo amplifier with analogue input.
Antenna: For connection of FM or AM antenna or for the communal or cable antenna system.
AC input: For connection of mains voltage. Make sure that the plug has been correctly
inserted, and that the voltage corresponds to the text printed on the back panel of the cabinet.
10