System Fidelity RS-250 - Manual (Page 10)

REAR PANEL DESCRIPTION
DVD: RCA cynch input for connection of DVD player (Note: Analogue stereo input only).
CD: RCA cynch input for connection of CD player.
AUX 1: RCA cynch input for connection of optional equipment.
AUX 2: RCA cynch input for connection of optional equipment.
Speaker out A and B (left and right): For connection of two pairs of loudspeakers.
AC input: For connection of mains voltage. Make sure that the plug is correctly
inserted, and that the voltage corresponds to the text printed on the cabinet back panel.
Antena: For connection of FM or AM antenna or for the communal or cable antenna system.
Notes:
- The speaker impedance must be between 4 and 16 Ohm.
- For optimal sound quality there must be a proper and firm connection between the speaker terminals
and the amplifier terminals. Ensure that all cables and sockets are not damaged in any way and all
sockets are firmly pushed home.
- The cable ends must not be frayed to avoid that they come into contact with each other or the cabinet
back panel. Be sure to connect the polarities of the speaker system and the speaker terminals correctly,
pair A on Speaker Out A and pair B on Speaker Out B (+ to +, - to -).
- When make the connection, please refer to the connection diagram. Make sure that all the units are
switched off during any connection. The RCA sockets on your RS-250 are color coded for your
convenience. Red and white are RIGHT and LEFT audio respectively.
Use high quality RCA-interconnect and speaker cables for optimum performance and reliability.
CONNECTIONS
11