Connecting other equipment, C. another source connection – Dolby Laboratories PVS177SG User Manual
Page 13
GB - 12
Notes:
• If the external equipment is a television and this audio system is close to it, you may experience interference if
the tuner function is selected while the television is working.
• Make sure to use correct Audio/Video cable, wrong plug connection may cause weak signal.
• If you have a stereo VCR, make sure you set it in stereo mode.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the
resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.
C. Another source connection
This unit can play Dolby Digital, but only in two channels.
Digital connection
Analogue connection
CONNECTING OTHER EQUIPMENT
Listening to another audio equipment
1. Turn on the Unit.
2. Turn on your audio equipment and follow the instructions included with it to select the AUDIO IN or DIGITAL IN
function.
Audio equipment with
digital audio input jack
Rear side of unit
DIGITAL
OUT
COAXIAL DIGITAL AUDIO CABLE
Amplifier of
stereo system, etc.
Right side of unit
(No need to connect
the Yellow video plug)
(Red)
(White)
AUDIO/VIDEO CABLE
AUDIO
IN
AUDIO/VIDEO CABLE (included)
(Yellow)
(Red)
(White)