Care and cleaning, Important – DCS WOU-130 User Manual

Page 35

Advertising
background image

33

US CA

Care and cleaning

To cancel the SELF CLEAN mode before it has finished
Turn the oven mode and temperature knobs to OFF. CLEAN COOL will appear in the oven mode
display and the door will remain locked until CLEAN END appears.

Important!

Do not turn off the mains power supply to the oven. The fans are needed to cool the oven.
Once the oven is cool or below the safe temperature, it will return to normal operation and the clock display
will show the time of day.

Short self-clean cycle
You can select a shorter self-clean cycle if the oven is only lightly soiled:

1

Select the SELF CLEAN mode by turning the oven mode knob.

2

Turn the temperature knob to its maximum position.

will appear in the display.

3

While

is showing, press the

COOK TIME

button. The COOK TIME and AUTO symbols and the

colon will flash.

4

Rotate

the

P U S H TO

C L E A R

button to reduce the time: this can be anywhere between two and three

hours.

5

Press

the

COOK TIME

button again, or wait eight seconds to adopt the setting and start the self-

clean cycle. The clock display will show the time remaining.

Self-clean – delayed start

You can set your oven to start a self-clean cycle at your convenience:

1

Check that the clock shows the correct time.

2

Select the SELF CLEAN mode by turning the oven mode knob.

3

Turn the temperature knob to its maximum position.

will appear in the display.

4

While

is showing, press the

STOP TIME

button. The STOP TIME and AUTO symbols and the

colon will flash.

5

Set the time that you want the oven to finish by rotating the

P U S H TO

C L E A R

button. If there is time

to wait before the self-clean cycle starts, AUTO and DELAY CLEAN will appear in the clock display.

6

When the self-clean cycle starts, AUTO, DOOR LOCK and CLEAN will appear in the clock display

and the time remaining will count down.

Advertising