DigiTech RP300A - Manual (Page 20)

SynthTalk™ ( syNtLK)
SynthTalk™ is another effect exclusive to DigiTech. It makes your guitar seem to speak
based upon the dynamics of your playing style.
Parameter 1 - The Number 2 Knob adjusts the Attack of the synthesized voice. Ranges
from 1 to 99.
Parameter 2 - The Number 3 Knob adjusts the Release of the synthesized voice. Ranges
from 1 to 99.
Parameter 3 - The Number 4 Knob changes the characteristics of the various synth voices.
Ranges from 0 to 99.
Mod Level - The Number 5 Knob adjusts the sensitivity or the input signal required to
trigger the SynthTalk™ effect. Ranges from 0 to 99.
Envelope Filter ( eNvlOp)
The Envelope Filter is an automatic Wah effect that alters your sound based upon how hard
the strings are struck.
Parameter 1 - The Number 2 Knob adjusts amount of Wah sweep once the Wah is
triggered. Ranges from 1 to 99.
Parameter 2 - The Number 3 Knob adjusts the sensitivity or the input signal required to
trigger the Wah effect. Ranges from 1 to 99.
Mod Level - The Number 5 Knob controls the mix of wet and dry signal. Ranges from 0
(all dry) to 99 (all wet).
The Number 4 Knob has no function when the Envelope Filter is selected.
Detune ( DetUNe)
A Detuner will make a copy of your incoming signal, take the copied signal slightly out of tune
from the original, and mix the two signals together. The result is a doubling type of effect as if
two guitars were playing the same part together.
Parameter 1 - The Number 2 Knob adjusts the amount of pitch difference applied to the
copied signal. Ranges from -18 to 18.
Mod Level - The Number 5 Knob controls the volume of the detuned note. Ranges from
0 to 99.
The Number 3 and 4 knobs have no function when the Detune effect is selected.
Pitch Shift ( PitCH)
A Pitch Shifter copies the incoming signal, then shifts the pitch of the copied note to a
different note. The shifted note is then mixed back with the original signal sounding as if two
guitars were playing in harmony.
Parameter 1 - The Number 2 Knob selects the interval of the shifted pitch. Ranges from
-12 (12 semitones below) to 24 (24 semitones above).
Mod Level - The Number 5 Knob controls the volume of the shifted pitch. Ranges from 0
to 99.
The Number 3 and 4 knobs have no function when the Pitch Shift effect is selected.
Whammy™ ( wHammy)
Whammy™ is an effect that uses an Expression Pedal to bend the pitch of the
incoming signal, or add a bendable harmony with the original signal. As the
Pedal is moved, the note will bend either up or down. When Whammy™ is
selected, it is automatically placed before the Amp Modeling as shown in the
block diagram (at the beginning of the Effects section). The Whammy™ effect
must be linked to the Expression Pedal in order to function. See page 18 for
more information on linking the Expression Pedal.
Parameter 1 - The Number 2 Knob selects the interval and direction of the pitch bend.
Choices are as follows:
16