Teo IP Phone 4101 Quick Start - Manual (Page 4)

Call Log
Press the LOG key to view the call log.
Press the LOG key again to exit.
Press the up or down arrow key to select UNANSWERED CALLS,
ANSWERED CALLS, or OUTGOING CALLS, and then press the
ENTER key.
The most recent call in the log will be displayed.
Press the Down Arrow key to view previous (older) calls.
Press the Up Arrow key to view the last-displayed (newer) call.
Press the Right Arrow key to view the duration of answered or
outgoing calls.
Press the Left Arrow key, and then the
key, to remove the
call from the log.
To dial the logged call entry, add any required prefixes if needed,
such as '9' or '91', then press the SEND or ENTER key.
ENTER
LOG
ENTER
SEND
Conferencing Calls
Press the CONF key to place the current call on hold.
You will hear a new dial tone.
Dial the party you wish to add to the conference.
After the added party answers, press the CONF key to conference
all parties together.
To remove the last party added, press the DROP key.
To remove yourself from the conference, disconnect the call (hang
up). Other parties may remain connected, depending on the
system configuration.
DROP
CONF
CONF
Transferring a Call
Press the TRANS key to place the current call on hold.
You will hear a new dial tone.
Press a speed dial key to dial the party to whom you wish to
transfer the call.
Or dial the party with the dial pad and then press the key.
You may wait until the called party answers to announce the call,
or transfer it immediately before the called party answers.
Press the TRANS key again to complete the transfer.
SEND
TRANS
TRANS
Holding a Call
Press the HOLD key to place the currently connected call on hold.
Press the HOLD key again to reconnect to the held call.
HOLD
HOLD
Answering a Call
To answer the call shown in the display, lift the handset, p
SPEAKER key, or press the HEADSET key. ress the
Placing a Call
Manual Dialing
Dial the number with the dial pad, and then press the SEND key,
lift the handset, press the SPEAKER key, or press the HEADSET
key.
You can also go off-hook before dialing. Press the SEND key or the
ENTER key after all digits are entered.
Speed Dialing
Press a speed dial key to automatically access an idle line and dial
a number.
You can also dial from the Call Log or Call Directory.
SEND
User Setup Options
You can customize your telephone with these user options:
CLOCK – Time and Date
KEYS
– Speed Dial
EDIT DIRECTORY
RINGING – Ring Tone, Off-hook Ringing
VOICE
– Handset/Headset Volume
PIN – Call Log PIN
The system may be configured to set the clock automatically.
Press the MENU key to enter Setup Mode.
Select USER from the main menu, then select the option you
want to change.
Press the MENU key when finished.
MENU
ENTER
MENU