Thinklogical DVI Splitter/Distribution Amp Dual Link 1:2 Quick Start Guide User Manual

Dvi splitter, The logical solution, The models

Advertising
background image

DVI IN

DVI OUT 1

DDC

DVI OUT 2

POWER

5VDC

The Future of Access and Control

DVI Splitter

+

DVI OUT 1

DDC

DVI OUT 2

Dual-Link
DVI OUT

Source

CPU

5VDC
Power
Supply

2

STEP 2:

Connect the 5VDC Power

Supply (PWR-000022-R) to the INPUT
POWER JACK located on the front
panel of the VDA Splitter’s chassis
and plug it into a standard AC source.

3

STEP 3:

Connect one end of

the supplied Dual-Link DVI-D
male to male cable to the
video source (DVI-D video
card) and the other end to the
DVI IN DUAL-LINK connector
on the VDA Splitter. Ensure
all video output displays are
functioning properly.

1

STEP 1:

Connect one end of a Dual-Link

DVI-D male to male cable from your DVI
Output Monitor 1 to the DVI OUT 1 DDC
connector on the VDA Splitter’s front panel.
Connect one end of a Dual-Link DVI-D male
to male cable from your Output Monitor 2 to
the DVI OUT 2 connector.

PHONE: 1-800-291-3211
WEBSITE: www.thinklogical.com
EMAIL: [email protected]

Visit us online at

www.thinklogical.com

for more product information, current

updates and the complete line of Thinklogical

™ products.

Copyright © 2010. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.

VDA Series DVI Splitter

Dual-Link 1:2

QUICK START GUIDE

The Logical Solution

The

VDA-3 Dual-Link

1:2 Splitter from

Thinklogical

™ sends a Dual-Link DVI video source

to two displays without signal loss. Installation is
plug-and-play with no adjustments required. Each

model is also compatible with most Thinklogical™
DVI Extenders.

The Models

VDA-1 (SL 1:2)

distributes single-link DVI to 2

single-link displays.

VDA-2 (SL 1:4)

distributes single-link DVI to four

single-link displays.

VDA-3 (DL 1:2)

distributes dual-link DVI to two dual-

link displays.

VDA_Splitter_DL_1x2_Quick_Start_Rev_A

DL Distribution Amp 1:2

When you receive your
Dual-Link 1:2
VDA Series
DVI Splitter you should
find the following items:

·

Dual-Link M-M, 2 meter
DVI Cable (2)

·

AC/DC Adapter

·

Quick Start Guide

Advertising
Table of contents