Refrigerator operation, Refrigerator storage, Crispers and covers – Dacor EF42NBSS User Manual

Page 12: Shelves and shelf frames, Ingredient care center

Advertising
background image

10

Remove and Replace the Ingredient Care Center Cover:

Remove food from ingredient care center cover. Pull drawer

1.

out about 4” (10.16 cm). Reach under the glass shelf with both

hands and lift gently upward until back of shelf is free. Tilt shelf

at an angle and remove shelf from refrigerator being careful

not to bump the glass.
Replace the cover by holding the glass shelf firmly with both

2.

hands, tilt the shelf at an angle and position it above the

support rails. Place shelf gently on support rails on side wall.

Crispers and Covers

To remove and replace the crispers:

Slide the crisper drawer straight out to the stop. Lift the front

1.

of the drawer with one hand while supporting the bottom of the

drawer with your other hand and slide the drawer out the rest

of the way.
To replace the crisper drawer, place the drawer onto slides

2.

and push the drawer back until securely in position.
Carefully test the crisper drawer to make sure it has been

3.

replaced properly.

To clean the crisper covers:

To clean the top crisper cover, remove the ingredient care center

located above it.
To clean the bottom crisper cover, first remove the top crisper

drawer.

Refrigerator Operation

Refrigerator Storage

Important information to know about glass shelves and

covers:
Do not clean glass shelves or covers with warm water when

they are cold. Shelves and covers may break if exposed to

sudden temperature changes or impact, such as bumping.

Tempered glass is designed to shatter into many small,

pebble-size pieces. This is normal. Glass shelves and covers

are heavy. Use both hands when removing them to avoid

dropping.

The shelves and compartments in your refrigerator are adjustable

and/or removable to meet your individual storage needs and to

make them easier to clean.
Storing similar food items together in your refrigerator and

adjusting the shelves compartments to fit different heights of

items will make finding the exact item you want easier. It will also

reduce the amount of time the refrigerator door is open, and help

save energy.

Shelves and Shelf Frames

To remove and replace a shelf/frame:

Remove the shelf/frame by tilting it up at the front and lifting it

1.

out of the shelf supports. Pull the shelf straight out.
Replace the shelf/frame by guiding the rear shelf hooks into

2.

the shelf supports. Tilt the front of the shelf up until the rear

shelf hooks drop into the shelf supports.
Lower the front of the shelf and check to make sure that the

3.

shelf is securely in position.

Ingredient Care Center

The control for the ingredient care center (for compartment

location, see illustration at right) adjusts the storage temperature

of the ingredient care center pan. Cold air flows into the pan

through the air duct between the freezer and the refrigerator.

Setting the controls allows more or less cold air through the air

duct.

To Adjust the Ingredient

Care Center:

Choose a setting based on the

1.

item to be stored in the pan.
Push the button that

2.

corresponds to that setting.
The indicator light for that

3.

setting will illuminate to verify

that the pan is ready to be

loaded.

Ingredient Care Center

Various Cheeses

Jams and Jellies

Fresh Produce

Fresh Herbs

Berry Fruits

Meats

Beverages

Cold

Colder

B

A

A. Ingredient care center

B. Cripsers

Advertising