Tri Tool CBM-2 Counterbore Module User Manual
Page 11
Advertising
11
Model CBM-2, Counterbore Module
92-0177 : Rev. 140226
WARNING:
WARNING:
Do not use a wrench or lever to obtain extra holding strength.
Do not force the feed.
If the feed pressure builds up too high, release the knob for 2 or 3 revolutions
before continuing.
When the counterbore is finished, release the Feed Knob and allow the Clamshell to
rotate 2 or 3 times to release the chip.
Retract the Tool Bit.
Remove the C’bore Module from the Clamshell.
Remove the Clamshell from the pipe as described in the appropriate Clamshell
instruction manual.
Advertising