Cutting speeds – Tri Tool SQM-2AC Squaring Module User Manual
Page 11
11
Model SQM-2AC Squaring Module
92-0714 : Rev. 970428
CUTTING SPEEDS
Use 200 surface inches per minute (5080 surface millimeters per minute) for:
Stainless steels in general when no coolant is allowed, all heavy wall tube and some
of the chrome/molybdenum steels.
Use 250 surface inches per minute (6350 surface millimeters per minute) for:
Mild steels and some thin wall stainless steels when coolants are permitted and
applied.
Use 300 surface inches per minute (7620 surface millimeters per minute) for:
Aluminum and thin-wall mild steel tube with coolants.
RPM for
200 in/min
(5080 mm/min)
RPM for
250 in/min
(6350 mm/min)
RPM for
300 in/min
(7620 mm/min)
1.50"
38 mm
42
53
64
2.00"
51 mm
32
40
48
3.00"
76 mm
21
27
32
4.00"
102 mm
16
20
24
4.50"
114 mm
14
18
21
Mean Cutting
Diameter
Cutting Speeds (approximate)