Triplett RWC1000K/RWC1000NP - Manual (Page 37)

35
EDIT NAME
NAMING / SAVING TEST RESULTS
EXIT SCROLL SEL
REVIEW TEST
SAVE READING
RWC TEST PORT
EDIT TEST NAME
All RWC1000 tests, whether RWC UTP, Basic UTP or coax, eventually
arrive at this screen. It is here where you decide to SAVE the test in
PRINTER MEMORY (with or without a custom NAME).
REVIEW TEST: Review test results before they are SAVED. After
reviewing the test results you can return to this screen.
SAVE READINGS: Store the results from the latest test in PRINTER
MEMORY for later printing. The next sequential Reading Number
(1-250) is automatically assigned along with any NAME that you
created (see EDIT TEST NAME below). Creating a name is not
required. Note: The test results of all RWC1000 cable tests can
be NAMED and STORED with the exception of RWC tests that
did not "PASS".
RWC TEST PORT: For RWC UTP tests only. See page 18.
EDIT TEST NAME: Create a name (not required) that is stored
with the sequential reading number. If you are going to create a
name, it must be created before the test is SAVED. See the fol-
lowing page for instructions on creating a NAME.
EXIT: Discards the test results and returns to the Main Menu.
Naming and Saving
test results start at
this screen