Triplett CobraCam USB III – PN: 8106 - Manual (Page 3)

3
Introduction:
The Triplett CobraCam USB 3 Inspection Camera is a hi-tech tool that uses the latest
technology to see images of difficult to view locations. Its water resistant flexible shaft
and miniature camera fit into awkward spaces, tight locations or through small holes.
Bright LED headlights in the camera illuminate dark areas, allowing the camera to ‘see’ in
total darkness. A magnetic probe, hook, and mirror enhance the usefulness by allowing
the camera to pick up magnetic objects, hook onto small objects, or view objects located
at right angles to the camera body.
The USB interface provides a low cost solution for users who already have a computer
with a USB connection. The provided software allows the CobraCam USB 3 to display its
images on computers running Windows ® 8, 7, XP, Vista ™ , & Linux. CobraCam USB 3
can be used with MAC, but only with the pre-installed software “Photo Booth”.
The CobraCam USB 3 requires no additional power source, and the software allows the
user to conveniently save photos or video of anything the CobraCam USB 3 sees. Adjust-
able software controls allow the images to be enhanced or modified in various ways.
Product Specifications
Size: Flexible Snake: 9/32” dia x 37” long
Camera: 21/64” (8.3mm) dia x 2” long
USB Cable: 6ft
Camera: 648 x 488 pixels (316K) Full VGA
1/9inch VGA CMOS imager
Focal distance 2 1/2”. Usable to infinity
54 degree viewing angle
F 2.8 lens
Auto exposure
Waterproof to 3ft
Snake: Polyethylene covered steel flex. Minimum radius bend, 1 1/2”
Illumination: 4 adjustable brightness white LEDs in camera head
Interface: USB 2.0
Operating System: Windows ® 8, 7, XP, Vista ™ , MAC, & Linux Kernel V2.6 or later
Provided Software: ViewPlayCap on CD PC Only
2