Triplett CobraCam Wifi – PN: 8120 - Manual (Page 5)

5
Overview / Controls
1 - Power turn on / LED brightness
2 - Battery low indicator
3 - Charging indicator (Orange: Charging, Indicator off: Fully Charged)
4 - Charging port
5 - Video input and output port
6 - Wand disconnect
7 - Wifi indicator (Red: Power on, Green: Wifi connected/connecting)
8 - Camera and LED housing
9- RESET button (Underneath rim)
Setup
Charging the Battery
To charge unit please use included USB charging cable and insert USB end into a USB power
adaptor (not included). Product can also be charged via a USB input on any computer. Charging
is indicated by orange LED. Full charge is indicated by orange LED going out. Charging should
take about 3 hours. See image below.
1
2 3
4
5
6
7
8
9