TS Performance 2110402 - Manual (Page 2)

Continued
Installation of TS Performance Power Play MP-8
6.6 Duramax LLY (medium duty)
Read all instructions and fully understand them before installing your TS Performance MP-8
module. Disconnect battery terminals and remove keys from the ignition before installation.
Place Di-Electric Grease onto every electrical connection.
1. Find the proper location for mounting the module itself. This should be a dry location using the
supplied Zip Ties to securely mount it.
2. Route the switch wire through the firewall to the MP-8. We recommend making a small hole in a
boot and running the wire through there. Make sure not to cut any wires when making the hole.
Fuel Rail Pressure Sensor MAP Sensor