Slide number 5 – TS Performance 8210101 User Manual
Page 5
Advertising
Troubleshooting
11
Troubleshooting Section
The TS Performance fuel enhancement module must be
powered to 12 volt battery and ground. The
connections to the actuators are plug & play for an easy
installation while increasing horsepower, torque, and
fuel economy.
Installation Overview
4
1. Be sure you have nice clean +12 Volt power to
Red
wire with eyelet on fuel module
2. The Black wires on the module should be
routed to a good clean chassis ground.
3. The FUELING ACTUATORS are highlighted (#19)
in the picture above.
Advertising
This manual is related to the following products: