Slide number 3 – TS Performance 9210201 User Manual
Page 3
Advertising
2
Contents of box
10
Module
Harness
zip ties, velcro
2
Troubleshooting
1. Be sure you have nice clean +12 Volt power to
Red
wire with eyelet on fuel module
2. The Black wires on the module should be
routed to a good clean chassis ground.
3. Be sure that all the connectors on our harness
are connected to the truck and nothing is left
un-plugged. If so, this will cause an open loop
and will activate the check engine light.
Advertising