Upsite 10108-001 Acrycell Sealing Tape - Manual (Page 2)

2 Designer & Manufacturer
(888) 982-7800 www.upsite.com
Installation Guide
AisleLok Acrycell Sealing Tape
Tools and Preparation Required for Installation
Tools Required:
• Scissors or cutting blade
Installation Procedures
Installation of AisleLok Acrycell Sealing Tape
Preparation: Measure the gap to determine the ideal size of Acrycell Sealing
Tape needed to properly seal the space. (See Product Chart) Prepare surface
before mounting Acrycell Sealing Tape by wiping with a damp cloth then use lint
free towel to dry.
1. Once the surface is clean and dry, begin peeling the backing off the Acrycell
Sealing Tape to reveal the adhesive.
2. Attach tape by pressing the adhesive side to the surface of one side of the
gap while unrolling and pressing to attach the tape straight and secure.
NOTE: It is preferable to peel the adhesive backing off as the tape is being
applied to avoid the inadvertent adhesion to other surfaces.
3. At the end of the gap, cut the tape to fit using scissors or a cutting blade.
Any remaining tape stored for future use must be kept under pressure to
prevent premature expanding. Recommended storage is immediate shrink
wrapping or securing the loose end by applying storage tape around roll to
keep material under pressure.
4. Allow ample time for expansion of time released tape to form secure seal.
AisleLok Acrycell Sealing Tape Specifications
Product Name Compressed Tape
Minimum Effective
Thickness
Expanded Tape
Maximum Effective
Thickness
Tape
Width
Roll
Length
.5” Sealing Tape
Item No. 10108-001
5mm 12.7mm 10mm 10m
.20” .50” .39” 32.8’
1” Sealing Tape
Item No. 10108-002
12mm 25.4mm 15mm 5.6m
.47” 1.0” .59” 18.4’
2” Sealing Tape
Item No. 10108-003
22mm 50.8mm 25mm 2.6m
.87” 2.0” .98” 8.5’