Verilink PRISM 3002 (34-00277) Product Manual - Manual (Page 51)

PC Setup A-3
14 Select the Download option and press ENTER for the download process to begin.
The actual downloading procedure overwrites the existing program in Flash. Ensure
that the appropriate file name is selected before pressing ENTER on the Download
option. Do not remove power or interrupt the download process in any manner. This
can cause the unit to lose its serial and hardware revision numbers that can only be
reinstalled at the factory.
The process of erasing the Flash may last a couple of minutes. The PC message
line indicates the current number of records sent:
Records Sent: --
If the entered filename does not exist in the local directory, the following error
message appears:
Cannot find file ----
Upload aborted, press a key to continue
15 Once the Flash is erased, the program begins counting the current number of data
blocks being uploaded. This process takes a few minutes to complete.
Records Sent: ----
Percent Sent: --%
16 After the software is downloaded to the unit, the PC beeps to indicate completion.
Most units automatically reset.
Do not remove power until the LEDs stop flashing.
17 When all files have been downloaded, a factory default maintenance reset
operation is recommended (see Maintenance Reset on page 4 -26). This can be
performed through the unit’s terminal interface start-up procedure (see Interface
Start-up on page 4- 1).