Verilink WANsuite 5165 (34-00301.H) Product Manual - Manual (Page 210)

4-86 W A N s u i t e 5 1 6 5
Filter Aging Timer Specifies the length of time an entry in the lookup table will be held if no
traffic is received from the specified MAC Address.
Values: 1
−
65535 s
Default: 300 s
The Bridge Details screen provides the following user-activated prompts:
Figure 4.83 Bridge Port Table
Selecting the Bridge Port Table prompt displays the screen shown below in
Figure 4.83. Selecting a number in the “Index” column of the Bridge Port
Table will bring up the Bridge Port Details screen (Figure 4.84), which
displays, and, in some cases, lets you change, these parameters.
Prompt Function
Bridge Port Table Displays the Bridge Port Table screen (Figure 4.83) that lets
the user access and configure the Bridge Port Details screen
(Figure 4.84).
Bridge Lookup Table Displays the Bridge Lookup Table screen (Figure 4.85) that
contains all MAC Addresses learned by the Bridge.