Verilink WANsuite 5370 (34-00310.D) Product Manual - Manual (Page 95)

W e b S e r v e r I n t e r f a c e 3-65
Figure 3.54 TCP Server Details Screen
Access the TCP Connection Details screen (Figure 3.55) by clicking on the
appropriate numbered link under the “Connection” column on the above
screen. The TCP Connection Details screen lists the index number, the
endpoint name, the TCP local port number, and whether or not this entry is
enabled.
Figure 3.55 TCP Connection Details Screen
Select the TCP Connection Table button to access the screen shown in Figure
3.55. This screen lets you see which addresses and ports are in a “listening”
state and which are already established.
Figure 3.56 TCP Connections Screen
Click on the “TCP Host Access Table” button on the TCP Connection Details
screen to access a screen (Figure 3.57) where you can specify up to 10 IP
addresses that may access the services provided by TCP Server. If no
addresses are provided, any host can access the services provided by TCP
Server.