Vuzix Wrap 1200AR User Guide - Manual (Page 30)

Wrap Stereo Camera
The Wrap 1200AR provides two independent VGA (640x480) cameras housed to
mimics a person’s natural eye separation and provide realistic stereoscopic 3D image
capture. The cameras provide full-frame, sub-sampled or windowed 8-bit images in a
wide range of formats, controlled through the Serial Camera Control Bus (SCCB)
interface.
Each camera has an image array capable of operating at up to 30 frames per second
(fps) in VGA with complete user control over image quality, formatting and output
data transfer. All required image processing functions, including exposure control,
gamma, white balance, color saturation, hue control and more are programmable
through the SCCB interface.
Technical Specifications:
Active Array Size
640 x 480
Temp. Range (stable image) 0°C to 70°C
Output Formats (8-bit) YUV/YCbCr 4:2:2
RGB565/555/444
GRB 4:2:2
Raw RGB Data
Max Image Transfer Rate 30 fps for VGA
Sensitivity 1.3 V/(LuxŸsec)
S/N Ratio 46 bB
Dynamic Range 52 dB
Scan Mode Progressive
Electronics Exposure Up to 510:1 (for selected fps)
Pixel Size 3.6 µm x 3.6 µm
Note: AMCap is installed as part of the camera driver set. Its only direct application with the Wrap
1200AR is for verification of proper camera operation.