Ericsson PHOTO R1900 - Manual (Page 20)

20 Printing From Start to Finish
2. Select the Paper Size setting for the paper size and source you are using:
■ To print a borderless photo on paper loaded in the sheet feeder, select the
paper size with a
Sheet Feeder - Borderless option.
■ To print on roll paper, select the size of your photo with a Roll Paper or
Roll Paper - Borderless option. (To eliminate space between photos on
certain sizes, select a Roll Paper - Borderless Banner option.)
Note:
For roll paper, make sure the maximum width of your photo is set to 8.3 or
13 inches to fit in the width of your roll paper.
■ To print on paper loaded in the manual feed slot using the single sheet
guide, select a paper size with a
Manual - Roll or Manual - Roll
(Borderless) option.
3. Select the orientation of your document or photo as the Orientation setting.
4. Click OK .
5. Open the File menu and select Print .
6. Select Stylus Photo R1900 , choose Print Settings from the pop-up menu,
and select the following print settings:
Note:
In certain programs, you may need to select Advanced before you can select Print
Settings. For more information about print settings, click the
? button.
7. Select the Media Type setting for your paper (see page 22).
Select your Media Type
(see page 22)
Select Color or Grayscale
output
Select Automatic or
Advanced mode
Pop-up menu