4 caution and employee safety, 5 essential training before daily use, 6 references – Watson-Marlow PF6 User Manual
Page 5: 2 general information, 1 unpacking and inspection, Caution and employee safety, Essential training before daily use, References, General information, Unpacking and inspection
INSTRUCTION HANDBOOK
PF6
PF6 IH EN 74-105-022 v1.04.doc
Version: 1.04
Page 5 of 30
1.4 Caution and employee safety
This manual should be read before using the PF6.
It is strongly advised that
-
Unauthorised / non-trained personnel should not open the cover of the electrical parts
-
The machine is placed in such a way that it is not exposed to high humidity, high temperatures
or other abnormal operating environment.
-
The machine should be used for dosing and filling of liquid fluids, only.
A peristaltic dispenser head is not suitable for viscous products; see section 4.3
1.5 Essential training before daily use
Read the section with Daily Use, thoroughly before using the machine.
Protective equipment and protective devices are installed:
The machine will not run unless the safety cover (Tube Bridge) is placed correctly.
Always respect the symbols on the machine.
Cleaning must be performed as described in section 8.
1.6 References
N/A
2 General information
2.1 Unpacking and inspection
Please check that all ordered items have been received and that no items are damaged during
transport. In case of any defects or omissions, please contact W-M Flexicon or your supplier
immediately.