Wavecom EasySatSystem (W-PCIe, W-PCI) V1.1.00 - Manual (Page 5)

WAVECOM EasySat System for W-PCI/e V1.1.00 User Manual Welcome

1
Welcome
Congratulations on your purchase of a WAVECOM decoder. The product that you bought incorporates the
latest technology in data decoding together with the latest software release available at the time of ship-
ment.
Please, check our website http://www.wavecom.ch for software updates.
Always check the latest documentation on the installation CD or on our website.
We thank you for choosing a WAVECOM decoder and look forward to work with you in the future.
This chapter introduces WAVECOM ELEKTRONIK AG, the field of activity of the company, and how you
may benefit from the expertise of WAVECOM ELEKTRONIK AG.
This document describes the 'EasySatSystem for W-PCI and W-PCIe' software of WAVECOM ELEKTRONIK
AG; this product is sometimes also called 'SAT-Coordination'.
Training
Please note that when required WAVECOM is able to provide training on the WAVECOM XML interface.
Training can be ordered to take place at the customer location or at our offices in Switzerland.
Revisions
Version Date Changes
1.0 09-Dec-2011 Adapt from manual EasySATSystem for W61PC.
1.1.00 24-Nov-2013 Adapt to the new XML RCI interface slightly. No change in function-
alities.
References
[1] WAVECOM ELEKTRONIK AG, EasySatSystem Specification, V0.2
System Description
Introduction
The W-PCI and W-PCIe SAT Option allows the monitoring of the L-band downlink in the 1550 MHz range -
the forward path - of the INMARSAT System. This link contains the traffic from the Land Earth Station,
LES to the Mobile Earth Stations, MES.
'EasySatSystemWP' is an application that manages the satellite decoding modes running on a system of
up to totally ten W-PCI or W-PCIe cards to prevent that more than one W-PCI or W-PCIe card monitors
the same satellite communication session, identified by a specific satellite mode (INMARSAT-B, INMAR-
SAT-M, INMARSAT-mini-M and INMARSAT-C), a service (data, fax, ISDN, etc.), and mobile earth station
identification number (termed MES Id in the following). The monitoring system configuration is specified in
a text file using a very simple syntax. For logging purposes, statistical data concerning the monitored ses-
sions can be collected.
'EasySatSystemWP' has two kinds of user interfaces:
The operational status display of the coordinated cards, i.e., the ‘EasySatSystemWP’ graphical user inter-
face (GUI).