Welltech LP-388 Oct-12-2007 User Manual
Welltech Communication
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- INDEX
- Chapter 1 Specifications
- Network Interface
- 1 Front appearance and Keypad Definition
- 2 Back Panel
- 3 Input Definitions
- 4 Menu keys
- 5 LCD Display
- 5.1 LCD Display in initializing mode
- 5.2 LCD Display in IDLE state
- 5.3 LCD Display in OFF-HOOK state
- 5.4 LCD Display in DISCONNECTED state
- 5.5 LCD Display for RINGING state
- 5.6 LCD Display for DIALING state
- 5.7 LCD Display for Incoming Call state
- 5.8 LCD Display in CONNECTED state
- 5.9 LCD Display in Call Waiting state
- 5.10 LCD Display for firmware upgrading mode
- 5.11 LCD Display for saving and rebooting mode
- 5.12 LCD Display for edit mode
- 6 Editing Display
- 7 LED Display
- Chapter 3 Telephony Operation and Function
- Chapter 4 LCD Menu Operation
- Chapter 5 Configuring the SIP Phone through Web Pages
- Step 1. Browse the IP Address predefined via Keypad
- Step 2. Input the login name and password
- Step 3. Enter the web interface main screen
- Step 4. Start to configure
- Chapter 6 Configuring through Telnet command lines
- 1. [help] command
- 2. [quit] command
- 3. [debug] command
- 4. [reboot] command
- 5. [pbook] command
- 6. [commit] command
- 7. [ping] command
- 8. [time] command
- 9. [ifaddr] command
- 10. [pppoe] command
- 11. [flash] command
- 12. [sysconf] command
- 13. [sip] command
- 14. [security] command
- 15. [line] command
- 16. [voice] command
- 17. [phone] command
- 18. [tos] command
- 19. [prefix] command
- 20. [rom] command
- 21. [auth] command
- 22. [passwd] command