3 hardware overview, 4 system requirements, 5 related documentation – Welltech SPCI2S Boards User Manual

Page 10: Hardware overview, System requirements, Related documentation

Advertising
background image

Section 2 Introduction

10

2.3 Hardware

Overview

The SPCI2S and SPCI4 boards are full length PCI boards with 33MHz 32 bit

PCI interface. The boards are Universal expansion boards capable of detecting

the host signaling environment in use and adapting themselves to either +5V
or +3.3V signaling environments.

Note: The distinction is the signaling protocol used and not the power rail to which board

connects.

Each board has an H.100 CT Bus interface, which is used to provide

connectivity to further boards or to other H.100 CT Bus compatible boards,
such as voice processing and fax cards.

The H.100 CT Bus supports 4096 channels (or timeslots) and the associated

clock and framing signals. Each board is capable of generating the CT Bus
clocks, or can act as a slave. CT Bus channels may be used individually or can

be grouped to provide a higher bandwidth data path. The signals are carried

between boards in a host computer using an H.100 CT Bus ribbon cable.

2.4 System

Requirements

To use the SPCI2S or SPCI4 signaling board, the host computer must meet

the following minimum specifications:

• This signaling board is for use only with UL listed computers that have

installation instructions detailing user installation of card cage
accessories.

• Rev. 2.1 PCI compliant computer system.
• One free 33MHz 32 bit PCI full size expansion slot.

2.5 Related

Documentation

U03HSP - SS7 Boards Programmer’s Manual for SPCI2S and SPCI4

This document provides further information on the use of the board.

05-2300 - SS7G21 and SS7G22 Signaling Server Hardware Manual

This document provides full instructions on installing the board into

Dialogic

®

SS7G21 Signaling Server products.

ECTF H.100 Hardware Compatibility Specification: CT Bus

This document provides further information on the H.100 CT Bus. This
document may be obtained from the ECTF web site:

http://www.ectf.org

PCI local bus specification Rev. 2.1

This document provides further information on the PCI bus. It may be

obtained from the PCI-SIG web site:

http://www.pcisig.com

Advertising
This manual is related to the following products: