Routing plan – Welltech WG5290 User Manual
Page 83
Welltech Computer Co., Ltd.
WellGate 5290 User Guide – V6.1
- 83 -
Figure 7.12-1
Routing Plan
The purpose of Routing Plan is to select T1/E1 trunk and channels by
your preference when there is a call from IP side to PSTN side. The PSTN
must be used in call flow edit or line hunting component to take effect.
Hunting Group
Start Path: Configuration>Routing Plan>Hunting Group
Figure 7.13-1
Parameters:
• Group ID: Hunting Group ID
• Description: Description of Hunting Group
• Hunting Method: Route selection
o
Random: Random select a trunk within this hunting group
o
Priority: Select a trunk by priority. (Priority 1 has lowest priority; 9
has highest priority)
o
Round Robin: Call is hunting rotationally
Start Path: Configuration>Routing Plan>Hunting Group>Detail
Figure 7.13-2