Mounting – Westermo Viper 408 User Manual
Page 16
Advertising
16
6641-2201
Removal
Disconnect all cables and unscrew the unit from the wall.
Cooling
This unit uses convection cooling. Avoid obstructing the airflow around the unit. Spacing
is recommended for the use of unit in full operating temperature range and service life.
Mounting
There are four 6 mm bore holes intended for mounting the unit. The unit can be mount-
ed vertical or horizontal. The unit is wall mounted.
X1
X2
X6
X3
X7
PWR
SERVICE
X4
X8
X5
FRNT
ST1
ST2
Advertising