Westermo GS-01 - Manual (Page 36)

36 6195-2201
+CSMS – Select message service
The supported services are GSM originated (SMS-MO) and terminated short message
(SMS-MT), Cell Broadcast Message (SMS-CB) services.
The syntax is: AT+CSMS=<service>
<service>:
0: SMS AT commands are compatible with GSM 07.05 Phase 2 version 4.7.0.
1: SMS AT commands are compatible with GSM 07.05 Phase 2 + version .
Application to GSM AT+CSMS=0 SMS AT command Phase
2 version 4.7.0
GSM to application +CSMS: 1, 1, 1 SMS-MO,SMS-MT
OK and SMS-CB supported
Application to GSM AT+CSMS=1 SMS AT command Phase 2 +
GSM to application +CMS ERROR: 301 SMS service Phase 2+
not supported
GSM to application +CSMS: 0, 1, 1, 1 GSM 03.40 et 03.41
OK (SMS AT command
Phase 2 version 4.7.0),
SMS-MO,SMS-MT
and SMS-CB supported
Application to GSM AT+CSMS=? Possible service
GSM to application +CSMS: (0) Only GSM 03.40 et 03.41
OK is possible (SMS AT command
Phase 2 version 4.7.0)
+CPMS – Preferred Message Storage
This command allows to define the message storage area to be used for reading, writing…
Command syntax: AT+CPMS=<mem1>, [<mem2>]
<mem1>: Memory used to list, read and delete messages. It can be:
• ”SM”: SMS message storage (in SIM) (default)
• ”BM”: CBM message storage (in volatile memory).
<mem2>: Memory used to write and send messages
• ”SM”: SMS message storage (in SIM) (default).