Westermo Lynx 100 - Manual (Page 9)

9 6640-2205
Interface specifications
Power
Operating voltage
Rated: 24 to 48 VDC
Operating: 19 to 60 VDC
Rated current 277 mA @ 24 VDC
145 mA @ 48 VDC
Rated frequency DC
Inrush current, I 2 t 49·10 -4 A 2 s @ 48 VDC
Startup current* 350 mA @ 24 VDC
Polarity Reverse polarity protected
Redundant power input Yes
Isolation to All other
Connection Detachable screw terminal
Connector size 0.2 – 2.5 mm 2 (AWG 24 – 12)
Shielded cable Not required
* External supply current capability for proper startup
Ethernet TX
Electrical specification
IEEE std 802.3. 2005 Edition
Data rate 10 Mbit/s, 100 Mbit/s, manual or auto
Duplex Full or half, manual or auto
Circuit type SELV
Transmission range 150 m, according to long cable specification
Isolation to Power
Connection TX connectors: RJ-45 shielded, auto MDI/MDI-X
Shielded cable Not required, except when installed in Railway applications as
signalling and telecommunications apparatus and located close
to rails.
Conductive housing Yes
Number of ports 6