Encore electronic LINEAR ENC-DRS - Manual

Multi-Room Audio
Distribution System
ENC-DRS
Keypad
Installation
Instructions
1. PRODUCT DESCRIPTION
The Encore keypad (Model ENC-DRS) serves as a speaker zone
controller for the Encore Multi-Room Audio Distribution System. Up to
four keypads can be connected to each hub. Each keypad in the system
selects its speaker zone’s audio source, controls the volume, tone,
balance, loudness, and all other functions of the system. The keypad
contains a Class D digital stereo amplifier with 60 watts maximum output
power (30 watts per channel) and is designed to connect to a pair of
6 or 8-ohm speakers.
The keypad connects to the hub with Cat-5 cable and mounts in a
single-gang J-box. For maximum output installations, four independent
high current power supply outputs are provided on the hub for supplying
dedicated power to the keypads through 2-conductor 16 gauge wire.
At each speaker zone, the keypad selects between the four primary
hub audio sources from source input wall plates (Model ENC-SIWP), or
from its local audio source connected to a local input wall plate (Model
ENC-LIWP).
The system features IR remote control. An infrared repeater system
monitors the infrared receivers at each keypad and repeats the infrared
remote control signals to the audio source components through infrared
emitters connected to the wall plates. IR emitters are sold in a 4-pack
as Model 2171-4.
2. KEYPAD FEATURES 3. INSTALL JUNCTION BOX
4. ROUTE CAT-5 CABLE FOR KEYPAD 5. PUNCH DOWN CABLE AT HUB 6. CONNECT CABLE TO KEYPAD 7. EXTERNAL IR TARGET (OPTIONAL)
8. CONNECT SPEAKERS TO KEYPAD 9. INSTALL WALL PLATE 10. POWER UP AND TEST LIMITED WARRANTY
This Linear product is warranted against defects in material and
workmanship for twenty four (24) months.
This warranty extends only
to wholesale customers who buy direct from Linear or through Linear’s
normal distribution channels.
Linear does not warrant this product to
consumers. Consumers should inquire from their selling dealer as to
the nature of the dealer’s warranty, if any.
There are no obligations
or liabilities on the part of Linear LLC for consequential damages
arising out of or in connection with use or performance of this
product or other indirect damages with respect to loss of property,
revenue, or profit, or cost of removal, installation, or reinstallation.
All implied warranties, including implied warranties for merchantability
and implied warranties for fitness, are valid only until the warranty
expires.
This Linear LLC Warranty is in lieu of all other warranties
express or implied.
All products returned for warranty service require a Return Product
Authorization Number (RPA#). Contact Linear Technical Service at
1-800-421-1587 for an RPA# and other important details.
USA & Canada (800) 421-1587 & (800) 392-0123
(760) 438-7000 - Toll Free FAX (800) 468-1340
www.linearcorp.com
PRINTER’S INSTR
UCTIONS:
INSTR,INSTL,ENC-DRS - LINEAR P/N:
228022 B - INK:
BLA
CK - MA
TERIAL:
20 LB
. MEAD BOND - SIZE:
11.000”
X 8.500”
- SCALE:
1-1
Copyright © 2009 Linear LLC 228022 B
INSTALL A SINGLE-GANG
JUNCTION BOX 56" TO 60"
ABOVE THE FLOOR FOR
THE KEYPAD
BE SURE THAT THE KEYPAD
IS NOT MOUNTED IN THE
SAME JUNCTION BOX WITH
120 VAC WIRING
SOURCE INDICATORS
SHOW SELECTED
AUDIO SOURCE
IR SENSOR
DETECTS INFRARED SIGNALS FROM
REMOTE CONTROLS, SYSTEM PASSES
IR TO EMITTERS AT INPUT WALL PLATES
SOURCE BUTTON
SELECTS INPUT SOURCE,
SELECTS WHOLE-HOUSE MODE
VOLUME BUTTON
ADJUSTS VOLUME, EQUALIZER,
AND AUDIO DYNAMICS OPTIONS
EQ BUTTON (EQUALIZER)
SELECTS EQUALIZER MODE
MUTE BUTTON
MUTES THE SOUND FROM THE
KEYPAD'S SPEAKER, SELECTS
DO NOT DISTURB MODE FOR
THE KEYPAD
POWER BUTTON
TURNS KEYPAD POWER ON OR OFF,
ALSO CAN TURN SYSTEM POWER OFF
VOLUME INDICATORS
DISPLAYS THE KEYPAD'S VOLUME
AND EQUALIZER SETTINGS
LABEL KEYPAD
AND WALL PLATE
LOCATIONS ON
CABLES
CAT-5 CABLES
FROM KEYPADS AND
SOURCE INPUT
WALL PLATES
KEYPAD
J-BOX
CAT-5 CABLE
TO HUB
ENCLOSURE
STRUCTURED
WIRING
ENCLOSURE
MAXIMUM WIRE RUN:
300 FEET OF CAT-5 CABLE
FROM SYSTEM HUB TO
ANY KEYPAD
UP TO FOUR KEYPADS
CAN BE USED WITH
EACH SYSTEM HUB
USE A 110 PUNCH DOWN
TOOL TO CONNECT CAT-5
FROM THE KEYPADS TO
THE HUB
FROM KEYPADS
16 AWG POWER
TO KEYPADS
(OPTIONAL)
ENC-HUB
BLUE POST
ORANGE POST
BROWN POST
GREEN POST
BLU
E S
TR
IPE
BLU
E S
OLID
OR
AN
GE
ST
RIP
E
OR
AN
GE
SO
LID
GR
EE
N S
TR
IPE
GR
EE
N S
OLID
BR
OW
N S
TR
IPE
BR
OW
N S
OLID
110 PUNCH DOWN
STANDARD FOR
CAT-5 CABLE
WIRE ALL 110 PUNCH DOWN
CONNECTORS THIS WAY
SPKRS ENCORE MODEL ENC-DRS KEYP
AD
Class D Digital Amplifier -
30 W atts per Channel Made in China 230085
B
LOCAL CAT- 5 HUB CAT- 5
HI PWR 16 A WG
TO HUB
TO
SPEAKERS
RIGHT
RIGHT
LEFT
LEFT
CONNECT SPEAKERS
TO THE KEYPAD
WITH 16 AWG WIRE
SPEAKER TERMINAL BLOCK
INSTALL KEYPAD INTO
THE J-BOX AND SECURE
IT WITH THE TWO
MOUNTING SCREWS
INSTALL COVER PLATE
MOUNTING RING WITH
TWO SCREWS AND
SNAP ON COVER PLATE
AFTER THE INSTALLATION IS COMPLETE, APPLY POWER
TO THE SYSTEM AND PLAY AUDIO FROM ALL CONNECTED
AUDIO SOURCE COMPONENTS
VERIFY THAT SOUND IS HEARD AS EACH ACTIVE SOURCE
IS SELECTED FROM EACH KEYPAD
PUNCH DOWN CAT-5
CABLE FROM HUB
TO KEYPAD HUB
CONNECTOR
CONNECT 16 AWG
POWER WIRE IF
HI POWER HUB
OUTPUTS ARE USED
(OPTIONAL)
TO HUB TO HUB
TO REMOTE
RED
IR TARGET
PLUG REMOTE IR
SENSOR INTO
EXTERNAL IR
CONNECTOR