Eiki LC-XS25 - Manual (Page 58)

58
Turn off the projector, and unplug the AC power cord from
the AC outlet.
First, clean up the dust on the projector and around the air
vents.
Loosen 2 screws of the filter cover with a screwdriver and
open the filter cover.
Put the new one back into the position and rotate back
the handle. Make sure that the filter cartridge is properly
and fully inserted. Close the filter cover and tighten the 2
screws back into position.
CAUTION
Make sure the filter cartridge is inserted in the projector.
If the filter cartridge is not inserted, the projector cannot
be turned on.
Do not put anything into the air vents. Doing so may
result in malfunction of the projector.
Reset the filter counter and the scroll counter (p.59).
Filter cover
Replacing the Filter Cartridge
Rotate the handle of the filter and pull out the filter
cartridge.
Screws
Filter cartridge
RECOMMENDATION
We recommend avoiding dusty/smoky environments when
operating the projector. Usage in these environments may
cause a poor image quality.
When using the projector under dusty or smoky conditions,
dust may accumulate on a lens, liquid crystal panels, or
optical elements inside the projector. Such condition may
degrade the quality of the projected image.
When the symptoms above are noticed, contact your
authorized dealer or service station for proper cleaning.
ORDER REPLACEMENT FILTER CARTRIDGE
Replacement filter cartridge can be ordered through
your dealer. When ordering, give the following
information to the dealer.
● Model No. of your projector
LC-XS25/LC-XS30
● Replacement Filter Cartridge
Service Parts No. 610 339 7665
Connect the AC power cord to the projector and turn on the
projector.
7
Maintenance and Care Maintenance and Care
CLOSE
handle
OPEN
handle
1
2
3
4
5
6