X-Treme Audio Classic Line - Manual (Page 2)

CLASSIC LINE
CLASSIC LINE
User’s manual
1. Safety instructions
It is very important that loudspeakers systems are used in a safe
manner. Professional loudspeakers are capable of producing ex-
tremely high sound levels and should be used with care. Hearing
loss is cumulative and can result from levels above 90 dB if people
are exposed for a long period. Never stand close to loudspeak-
ers driven at high level. For stacking, ensure that the floor or stage
is level and solid. Do not stack speakers too high outdoors where
winds could topple the stack.
Fig. 1 Classic Line systems, flying configuration
Flying systems should only be assembled by a trained and expe-
rienced crew, working in association with professional riggers. All
Classic Line custers must be hung from secure and appropriately
load rated rigging points.
2. General information
The X-Treme Classic Line loudspeaker systems are highly efficient
touring products suitable for a wide variety of medium and large
scale live sound applications.
XTH is a highly efficient two-way (MF-HF) speaker with a 12” horn
loaded midrange loudspeaker and 2” compression HF driver. The
coaxial structure of the two medium-high sections allows an ex-
traordinary degree of freedom from phase distortions and also con-
trols the polar diagram perfectly. The compact design and angular
response free from obstructive side lobes allow the arrangement
of both simple as well as complex horizontal and vertical clusters.
CONTENTS
1. Safety instructions
2. General information
3. Instructions
4. Stacking or flying?
5. Stacking Guidelines
6. Subwoofers
7. General Guidelines for the use of subwoofers
8. Amplification
9. Connectors
10. Cable length
11. System configurations
2/7