X-Treme Audio XTDP - Manual (Page 11)

Owner’s manual
General
Inputs
2
Input Impedance > 10k Ohm Electronically balanced
Maximum Input level +20dBu
Outputs 4 [XTDP24] or 6 [XTDP26]
Output Impedance <100 Ohm, ground balanced
Maximum Output Level +20 dBu into 600 Ohm load
Sample Rate 96 kHz
Bit Depth 24 bit
Frequency Response 10Hz to 40kHz, +/- 3dB (filters disabled) - 20Hz to 20kHz, +/- 0.5dB (filters disabled)
THD <0.008% typ (20Hz to 20kHz)
Dynamic Range >110dB (A weighted, 22kHz bandwidth)
Serial Comms Data 115.2kbaud, format: 8 data, 1 stop, no parity
Processing
Gain
+20dB to -80dB and mute, 0.2dB steps
Output Ch. Source Input A, Input B and SUM
HP filter frequency Off, 20Hz to 25.4kHz, 1/36 octave steps
LP filter frequency 20Hz to 25.4kHz and off, 1/36 octave steps
LP / HP filter type
12, 18 & 24dB/octave Bessel and Butterworth - 12, 24 and 48dB/octave Linkwitz-Riley
4
th or 8 th order Hardman
Delay Input 400 ms, output 80 ms
Limiter High performance limiter, adjustable threshold in 0.2dB steps, automatic time constants
EQ frequency 10Hz to 25kHz, 1/36 octave steps
EQ gain +15dB to -15dB, 0.2dB steps
EQ width 5.0 to 0.1 octaves bandwidth, 1/36 octave steps
Connectors
Audio inputs
3 pin female XLR
Audio outputs 3 pin male XLR
Serial comms 9 Pin D female
Network comms (option) Ethercon ruggedised RJ45 (2)
Mains 3 pin IEC
Mains Power Universal switch-mode PSU, 85 to 250 VAC, 50 / 60 Hz
Consumption < 25 Watt
Dimensions 44 mm (H), 482 mm (W), 254 mm (D)
Net weight 2.7 Kg
10. Technical Specification
11/13